How To Polish Marble Without Damaging It & Leave It Looking Like New

Recommendations To Keep Your Marble Surfaces In Good Condition

Polishing marble is not as difficult as it might seem. You have probably heard of the words “polish,” and “marble” and immediately thought of an impossible task. However, polishing marble without damaging it is possible.

Let’s admit the truth. Marble is a beautiful stone that requires special maintenance, but luckily, there are ways to polish marble that can make things easier for you. Better yet, these methods can leave your marble floors looking new.

You can contact natural stone cleaners in San Tan Valley if you want professional service, but you can also try the following to keep your marble surfaces in good condition. 

Before Getting Started

Before learning the best steps to clean and polish your marble surfaces, you should know the two different marble finishes. This way, you can work with the right materials. You don’t want to restore a shine to one marble finish that’s not glossy. 

Honed Marble

Honed marble has a velvety finish. It’s not quite matte, but not shiny either. This type of finish is less slippery than polished marble, so it is suitable for floors. 

Some people opt for this finish for their countertops too to avoid scratches. Honed marbles are better at hiding marks than polished marble, but they require constant sealing. 

Since they are very porous, they are prone to stains.

Polished Marble

Polished marble is the more common choice for table inlays and countertops. This type of marble is less porous, so it doesn’t stain easily (honed marble stains more). It does not demand the same frequency of sealing either. 

Polished marble has a semi-reflective surface that helps to make your kitchen look attractive and even bigger.

The best way to care for both types of marble is with Queen Creek natural stone cleaning services.

It is possible to turn a honed marble into a polished surface, but it requires a lot of experience and special tools. It’s best to leave this job to professionals. 

How To Polish Marble Floors By Hand

You should avoid conventional cleaners because they are usually too abrasive for marble. The techniques of polishing marble floors vary depending on the kind of marble. Take note of the following recommendations:

• If you have natural marble, you can remove stains with a damp sponge and pH-balanced soap. Rub the sponge gently and rinse with water afterwards. For deeper stains, use a poultice. You can use a nylon bristled brush to clean the surface if you have cultured marble, but remember to use a mild household cleaner.
• To polish it, mix 3 tablespoons of baking soda with 1 quart of water and use a clean cloth to apply the mixture. Wait 5 hours to dry. 
• If you have cultured marble, use special wax or compounds. You can also use wax made for cars.
• Once the natural marble is dry, gently wipe it off with another clean cloth and add a sealant if you want. Cultured marble dries easier and doesn’t need further care.

Contact a Apache Junction natural stone restoration service if you think you need extra help with your marble surfaces. 

Polishing marble by hand is effective when you remove the stains on time or if the tiles are new. However, this method won’t be enough for wear-and-tear damage. In that case, you will need a restoration service for sure.

How To Polish Marble With A Polishing Machine

You can polish your marble floor with specific equipment, including different sizes of diamond polishing pads and an electric sanding machine. Wear working gloves, safety goggles and a face mask to prevent hand and eye damage. 

Follow these recommendations:

• Protect sensitive surfaces surrounding the marble
• Use turpentine to peel off wax

These are the steps you have to follow to polish your marble sanding:

1. Use cold and clean water to cover the surface
2. Attach the sandpaper’s coarsest grit to the electric polishing machine 
3. Move the polishing machine in a side-to-side motion four times to remove wax residue. 
4. Vacuum the floor to ensure you didn’t miss any spots.
5. Repeat the same motion process, but using less coarse grits as you progress until your marble gets the shine you want.
6. Add marble plaster to the grit on the last pass.
7. Clean the floor with a mop.

A Queen Creek natural stone cleaning services may be necessary if you think you can’t follow these steps. 

After doing the previous steps, remember the following for the final touches:

1. Add a microfibre polishing pad to the sander.
2. Apply polishing powder on the marble floor.
3. Buff the marble.
4. Clear away any debris.

Reach Out To The Experts

We know that polishing marble can be tedious, even if you try to do it by hand, but don’t worry, we are here to help. Contact Arizona Stone Care if you want to enjoy a professional service and leave your marble floor looking new. You can contact us by phone or email, we’ll be happy to assist you!